...kickdown and press control valve, need to know how the valve body comes apart or a diagram would help. post to Dodge , not JEEP for best help.....? the FSM> or alldata.com has this, login and
...valve control. where does the third one go? I capped it after finding a fitting broke (which I could not tell if it was an elbow or a cap). It ran worse. According with the 5.2L V8 Engine Service ...
...diagram to help you, this is a little to locate the bad actuator as there are so many, but a good way is to locate one by one and watch it as you move each control of the heater system and see if it ...
...dies. Will not idle. replace the idle air control valve and that will solve your problem good luck, hope this helps, here is a picture of the part and a diagram of its location on the
...Control Module). Visit some Autozone ot AutoShop with a scan tool or code reader; keep in mind that all parts stores will read codes for free in the parking lot now. With this number codes, come back ...
...Control (MC) solenoid is shorted or the ECM is faulty. Fuel Injected Engines: Code 54 - Camshaft (or distributor sync.) reference circuit - No camshaft position sensor signal detected during engine ...
...valve body that may be a bit gummed up. 95's show a shift control module on some diagrams I've seen, but not on others. I read this as a possible "half-year change" So you may or not have one. If you ...
...control suddenly quit working, and the a.c. air only comes out of the defrost vents. Is there a fuse that controls this, and which fuse is it? Thanks it seems like a vacuum leak the symptoms you ...
Question about Jeep Grand Cherokee
...THE PLUG AND WIRING.A DIAGRAM WOULD BE NICE. THANKS FOR THE REPLY. SOUNDS TAHT THE SOLENOIDS THAT CONTROL THE TORQUE DISTRIBUTION IS BAD. THAT TYPE OF SYSTEM IS BETTER LET THE DEALER FIX THE
2,181 questions posted
Usually answered in minutes!
3,350 Questions
3,279 Questions
2,899 Questions
2,715 Questions
2,521 Questions