Question about Chrysler Sebring
...front lower control arm of power steering squealing and felt like flat tire, Mechanic removed and reinstalled right front lower control arm of power steering. Still squeals when turning. dunno for ...
...lower front (right) control arm on my granddaughters 02 chrysler sebring. I have worked on my autos but never replaced a control arm. Help Check this VIDEO like reference. The first thing you need to ...
...body of the vehicle. Remove the reinforcement. 7)Remove the pivot bolt attaching the front bushing of the lower control arm to the front suspension cradle crossmember. 8)Remove the lower control
lower control arm off my 01 stratus SAFELY RAISE SUPPORT VECHICLE ON JACK STANDS. MAKE VECHICLE SITTING ON LEVEL SOLID GROUND. REMOVE FRONT WHEELS , REMOVE HEAT SHIELD, IF EQUIPPED WITH 15 INCH WHEELS
Question about Pontiac Cars & Trucks
...front lower control arm bushing is mounted vertically. REMOVAL AND INSTALLATION Some special tools are required to perform this operation including, a front hub spindle removal tool and a suitable ...
Question about Chrysler Sebring
...FRONT KNUCKLE MOUNTING Remove the nut (5) and pinch bolt (4) clamping the ball joint (6) stud to the knuckle (3). Separate Ball Joint From Knuckle Separate Ball Joint From Knuckle CAUTION Upon ...
...lower control arm front (1) and rear (4) mounting bolts.Remove the lower control arm (1) from the vehicle and place in a vice.Drill out the 3 rivets (3) retaining the ball joint to the lower control ...
...lower control arm bushing that usually goes, is the front one. The rear one doesn't usually go, it is horizontally mounted. The front one for some reason is vertical. The control arm must be removed, ...
...removing the rear mounting bolts. Remove the bushings with a bushing service tool (see Resources). When installing the new bushings, do not use lubricant and make sure they seat properly on the ...
...lower left front ball joint ? Removal & Installation NOTE This procedure requires the use of the following special tools: J 9519-E Lower Ball Joint Remover and Installer, J 34874 Booster Seal ...
395 questions posted
Usually answered in minutes!
1,173 Questions
965 Questions
801 Questions
581 Questions
462 Questions