2006 Chrysler Sebring "thermostat housing" Questions

Ad

Question about Chrysler Sebring

1 Answer

...located (to replace)? Fig. Thermostat and housing-2.0L Fig. Thermostat assembly-2.4L engine Fig. Air bleed valve (1) and thermostat housing (2) 2.7L-engine Hope helps (remember to rate

Ad

...thermostat housing LOCATION on the engine of a 2005 Chrysler Sebring 2.7L V6. I have already replaced the upper water outlet housing, and was told it is not where the thermostat is located Click over ...

Ad

Question about Chrysler Sebring

1 Answer

...something and My thermostat light went on along with the gage going to hot Follow the upper rad hose from the radiator and it will take you to the thermostat housing,the thermostat is in that

...engine block, it will lead you to the thermostat housing, which is mounted to the block. You will need to remove the housing mounting bolts and remove the housing to access the thermostat

Question about Chrysler Sebring

2 Answers

...has to bolts to remove and you will find the thermostat under it once you remove the mounting. FOLLOW THE TOP RADIATOR HOSE.IT WILL TAKE YOU TO THERMOSTAT HOUSING.THERMOSTAT IS INSIDE THE

Question about Chrysler Sebring

1 Answer

...thermostat located? Follow the the upper radiator hose from the radiator towards the motor, this hose attaches to a housing on the motor, the housing has two bolts, the thermnostat is located inside ...

Question about Chrysler Sebring

2 Answers

...housing to expose the thermostat (may require a little prying with a screwdriver or similar tool). Note how the old thermostat is fitted (which end is up), lift it out of the engine, and then remove ...

Question about Chrysler Sebring

1 Answer

...thermostat housing (looks like half a ball with 2 hoses coming out of it) Drain the coolant, and remove the housing..there are 3 bolts. Note the position of the old thermostat before removal. Install ...

Question about Chrysler Sebring

2 Answers

...thermostat housing, kinda ball shaped, there are 2 bolts holding it on, get ready for a spill, don't do this hot. Remove the housing, you might be able to leave the hose attached, if not just get it ...

thermostat housing. Remove the thermostat housing bolts. Remove the thermostat and housing. Fig. Air bleed valve (1) and thermostat housing (2) 2.7L-engine Hope helps (remember rated and comment this)

Not finding what you are looking for?
2006 Chrysler Sebring Logo

730 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Chrysler Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

john h

Level 3 Expert

29494 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...