2001 Chrysler Concorde "start camshaft sensor unplugged" Questions

...camshaft. i have a 2001 chrysler concorde lxi the other day it just woulnt start. after having it towed to my mechanic all signed lead back to the cam sensor. so the cam and crank sensors were ...

...in it wont start. you replaced cam? or cam shaft sensor? if u just replaced camshaft sensor. its probly the timing chain. it slipped and now u need to retime the engine after u install new timing ...

...camshaft and crank sensor were off. put the car back together. it started op immediately. when the car was running the coil started melting. i put a new one in because i figures i steped on it or ...

...camshaft position sensor is bad? Purchased a 04 rio with a blown timing belt. I put a new head on the car, timing belt etc. triple checked my marks, spun the enginge by hand before starting, check ...

...start code for camshaft sensor keeps coming up changed it and still no start Wiring to and from sensor to module need verification . The crankshaft position sensor can go bad on Dodge engines and ...

...camshaft sensor (code p0340) the car still wont start. I did unplug the + on the battery. I went back to check the code and i am still getting the p0340 code change the crankshaft positon sensor in ...

...start. p0340 is a camshaft sensor circuit malfunction, and that will effectively cause long crank times before starting and also can cause rough idles, sputtering, etc.. Could be the sensor itself ...

...start and also the check ing lite comes on and the code is po340 and I replaced the cam sensor with a new one and the problem is still there PO340 IS NO CAMSHAFT POSITION SENSOR CIRCUIT FAILURE.YOUR ...

start with the camshaft sensor plugged up? 2001 dodge neon 2.0 se i bought 4 computers and the did the same thing, 2 new cam and crank shaft sensor. so unplugged cam sensor and it started right up. so

...camshaft sensor in place and start the two mounting screws by hand to avoid damaging the threads. Tighten the two mounting screws using the Phillips screwdriver. > Plug the camshaft-sensor ...