1997 Chrysler LHS "timing belt" Questions

...timing belt back on my chrysler lhs 1996 i can not get the timing belt on my car. YOU NEED TO COMPRESS THE BELT TENSIONER IN A VISE STICK A PAPER CLIP IN IT TO HOLD IT IN UNTIL YOU GET TIMING BELT IN ...

...timing belt, when you replace the waterpump on this car the timing belt should be replaced no doubt about it, the timing belt must be replaced and also the pulleys checked and if the car have 100,000 ...

...timing belt was "loose" by looking beneath the front cover. As the back side of the belt drives the water pump using contact, it seemed entirely logical to inspect the entire drive, lubricating and ...

...timing belt was under insufficient tension, I replaced the tensioner with one from a salvaged car. The tensioner had to be compressed using a vise and the assumption was made that it had to be good ...

...timing belt why is this Sounds like your timing is off, or...valves got bent if the old belt broke. sound like its out of time or has some bent valvles. Tear it back down to the timing and recheck ...

...Timing Belt, cause your vehicle would have shut down as soon as it broke. It is possible that the water pump has gone bad. And it is run by the Timing Belt. So, it would only make sense to change the ...

I believe that the timing hs changed. Engine will not start..Question is: Is the timing a belt or a chain in a 3.5 liter 1996 Chrysler LHS It is a timing belt in the 3.2L and the 3.5L

how do i loosen the idler pulley to get a new belt on you will need a 3/8 ratchet and a short extension if you look at the front of the idler you will see a square put the ratchet in that hole and you

...has the 3.5 ltr you should take it to a reputable shop,specialty tools are needed to replace the timing belt on these engines,if they are not used the pistons and valves can be damaged,hope this ...

...timing belt broke and the mechanic i gave it to says its an interferance fit but i keep haveing ppl tell me the 97 3.5l isn't but the 98 and up are so is mine a interference fit or not? Not that it ...