new trans. It could be a 10 min. fix just a matter of unscrewing a sensor and screwing another one in. I've seen alot of problems with speed sensors, input, and output sensors. Have a scan done though
Question about Chrysler LeBaron
Put old sensor back in and shifting returned to normal. New sensor looks exactly like the old one. 1) Should I try another brand sensor? 2) Is the Output sensor not the problem? try another sensor. it
Question about Chrysler LeBaron
...spot to access. No gaskets are needed, the new sensor should come with a new o-ring seal. Just make sure everything is very clean, and put a little vaseline on the o-ring and sensor port ...
...put in new, reset computer, drove 100 yds. check eng lite 2nd gear again, now computer said speed control sensor bad. auto zone computer had no info on speed sensor where it is. looking for more info ...
Question about Cars & Trucks
...put the new wires in old plug it had 7wires in it but will be5wires becus no input speed sensor so thous2 wires arnot thair an thats why i need to know if it will work or if it will have drive abilty ...
Un plug the connection and unscrew it from the case. The input and out put look similar, but the threads are different so check the new one to make sure you were given the right one from the supplier
Question about Hyundai Cars & Trucks
...put new output and input sensors now it is lack of power and still shifts hard but not as bad light came back on codes p0700 p0722 code p0700 is TCM problem code p 0722 is output shaft speed ...
...put on the parking brake remove the entire air box on the front right remove the wheel well cover and locate the black cover on the front of the transmission(behind the raidiator)the output speed ...
Question about Cars & Trucks
...PUT WRONG PARTS ON THIS CAR LIKE VSS TAIL OF TRANNY SENSOR? NOT TOLD 6SPEED BOX SHIFTS GREAT. I GUESS YOU FEAR SCANNING THIS CAR AND SEE GLAN ERRORS OR CLUSTER ERRORS OR ABS ERRORS OR TRANSMISSION ...
...Put the new sensor in with a twisting motion. The sensor square end must mate with the square opening in the output shaft gear. Align the bolt hole and install the bolt and connector. Test drive to ...
313 questions posted
Usually answered in minutes!
235 Questions
160 Questions
127 Questions
143 Questions
95 Questions