hazard switch - the relay for the hazards and the turn signals is built into it. When they start to die, you will see erratic behavior with the turn signals and/or hazards, and eventually they'll both
Hazard light switch fails a lot on Audis and VWs. It is located above the radio. It is the big red button with the triangle on it. To removed and replace you need to remove the radio
hazard light switch. I just figured it out the other day. I had the same problem but also had intermittent blinker problems. I knew the problem with the blinkers was the switch but no idea what caused
...stopped working the hazzard lights are working ok The turn signal actuator is behind the hazard light. You have to remove the radio and the switch will be above the radio area behind the hazard
...hazard light warning button in the middle of your dash is actually a relay that often fails, causing this problem. New switch required. Almost certainly earth fault, try connecting extra earths hear ...
...hazard light button in the center of the dash. you can hear the clicks of both the hazard lights and the signal lights coming out of that area. To change out the relay, take out the radio, and you ...
Audi tt x reg - the key fob is not working. Additionally, the hazard warning lights intermittently come on when i the engine. The hazard warning lights do not stop flashing and i often have to try ...
...above radio that clips in. Remove this cover and you will be able to access the hazard light switch. Install and test new switch before assembling. This will take care of your
...I had the same problem. I went to the dealer though because my blinkers were not working but the hazards were so I knew the lights were okay. It turns out there was an issue with some realy switch ...
253 questions posted
Usually answered in minutes!
353 Questions
161 Questions
125 Questions
87 Questions
43 Questions