20 Most Recent 2001 Audi TT Questions & Answers

Find someone with "VAGcom" or VCDS cable and software.

2001 Audi TT | Answered on Nov 21, 2017

You must have the security anti-theft code for your Audi radio from the car manufacturer, or from an Audi dealer!
You can find the radio code at: http://www.radio-code.co.uk/

The sequence of programming for 2001 Audi TT radio is:
1. Push simultaneous "SCAN" and "RDS" keys until on the screen will appear "1000" displayed.
2. Release keys. No more push on "SCAN" and "RDS" keys because otherwise number "1000" will be considered as first safe code attempt.
For example: we have the security code "5079". Then:
3. By the no.# 1 key you will set up the first safe code digit. Push 5 times on the no.# 1 button. The "5" number will be setted.
4. By the no.# 2 key you will set up the second safe code digit. Push 10 times on the no.# 2 button. The "0" number will be setted.
5. By the no.# 3 key you will set up the third safe code digit. Push 7 times on the no.# 3 button. The "7" number will be setted.
6. By the no.# 4 key you will set up the four-th safe code digit. Push 9 times on the no.# 4 button. The "9" number will be setted.
7. Then push again simultaneous "SCAN" and "RDS" keys for confirm this safe code. On the screen will be displayed "SAFE" notice. Release keys! For few seconds a radio frequence will be displayed. The radio is now ready for use!

2001 Audi TT | Answered on Nov 10, 2017

If all your gauges and sensors radio and Cetera is working I wouldn't try guessing you can try falling the wires back and see what they go to but that's practically impossible go get you a wiring diagram book for your vehicle and if I could think of the website you could spend like 30 bucks and have full blueprint diagrams of your vehicle for 12 months online

2001 Audi TT | Answered on Oct 06, 2017

bad wiring or faulty fuel pump

2001 Audi TT | Answered on Mar 08, 2017

If you know someone with VCDS (diagnostic software and adapter), maybe a module is coded wrong, and 'phone' needs to be removed in the coding.

2001 Audi TT | Answered on Feb 03, 2017

Fault code P1297 may be set if the car is driven under load or revved up and then returned to idle. Fuel mixtures may go lean as well. If these symptoms occur, check the pressure relief valve in the crankcase breather system. If the valve is NOT moving freely, you found the problem. Replace it.

2001 Audi TT | Answered on Aug 24, 2016

You pull the cluster out and have it rebuilt. Check online for repair facilities, there are lots of the. They will supply removal instructions on request and a shipping container t send it in, turnaround is about 10 days.

2001 Audi TT | Answered on Aug 17, 2016

Model make engine variant

2001 Audi TT | Answered on Apr 17, 2016

Hi Jill, you have been very busy maintaining your TT!

120Nm/89 ft-lbs is OEM as per Bentley Service manual...I believe it is also in the owners manual.

2001 Audi TT | Answered on Dec 30, 2015

You are right in attempting to screw the caliper piston back in! But you will need a special tool to assist you though, it locates into the 2 holes in your caliper piston and it will look similar to the one in the picture:

2001 Audi TT | Answered on Dec 30, 2015

Start with scan. Sounds like fuel filter or pressure regulator. Check vacuum and throttle body. O2 sensor,

2001 Audi TT | Answered on Nov 14, 2015

Not finding what you are looking for?

536 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

2002 Audi TT
2002 Audi TT

155 Questions

2000 Audi TT
2000 Audi TT

161 Questions

2003 Audi TT
2003 Audi TT

125 Questions

2004 Audi TT
2004 Audi TT

84 Questions

Top Audi Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers


Level 3 Expert

76846 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

14384 Answers

Are you an Audi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

TT Audi

  • TT Audi

Most Popular Question

error p1297 connection turbocharger

  • Cars & Trucks