1999 Suzuki Vitara "headlamp adjustment measurement" Questions

Ad

...headlamp as it is aiming to low The adjustment screws/nuts should be located either on the top of the headlamp assembly, behind the headlamp assembly, or near the frame rail by the radiator support. ...

Ad

Question about Suzuki Vitara

2 Answers

...headlamp adjustment pararmatures such as height of beam at approx 50 yards from car? Take your car and park it 10 ft from a wall or a building, now take a tape measure and measure 36 inch's from the ...

Ad

...headlamp aim may be affected and adjustment may be necessary. If oncoming vehicles flash their high beams at you, this may also mean the vertical aim needs to be adjusted. It is recommended that the ...

Question about Suzuki Vitara

1 Answer

...Headlamp Adjustment Headlamp Aiming The headlamp aiming procedure depends on what type of beam pattern the headlamp is equipped with. Vehicles may come equipped with visual optical left (VOL), visual ...

...headlamp adjustment: check the tire inflation.check that no other load is in the vehicle other than a half tank of fuel.check that the headlamps are clean.check for correct headlamp operation.check ...

...aimed. Turn the headlamps On and select the Low beams. Rotate the headlamp vertical adjustment screw (2) on the inboard side of each front lamp unit housing (1) to adjust the beam height as ...

...ADJUSTMENT 1. Park the vehicle on a level surface approximately 7.6 meters (25 feet) from a vertical wall or screen directly in front of it. 2. Measure the height from the center of your headlamp to ...

...Headlamp Adjustment —Screen Method Aiming NOTE: Horizontal aim is not necessary for this vehicle and is not adjustable. NOTE: Consult your state's vehicle inspection manual for recommended tolerance ...

...headlamp adjustment: Check the tire inflation. Check that no other load is in the vehicle other than a half tank of fuel. Check that the headlamps are clean. Check for correct headlamp operation. ...

...headlamp beams? They do not appear correctly aligned. The adjustment screws/nuts should be located either on the top of the headlamp assembly, behind the headlamp assembly, or near the frame rail by ...

Not finding what you are looking for?
1999 Suzuki Vitara Logo

641 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Suzuki Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

john h

Level 3 Expert

29494 Answers

Are you a Suzuki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...