...key to be programmed into ignition switch. Switch ignition ON and OFF. Within 10 seconds: Single acoustic signal will be heard and immobilizer LED stops flashing and illuminates for 3 seconds to ...
ignition key switch have gone bad and the tumbler assembly needs to be replaced,the new tumbler assembly can keyed to the original key if the key is not worn out.this should be replaced with a new key
...ignition has completly locked up. My key is pretty worn looking. I have tried jiggleing the key, turning the wheel, rocking the entire car, and even begging my car( not a sound or sustantiated method ...
...4. Turn the key in the ignition to the "off" position and remove the key to exit remote programming mode. Test each remote by locking and unlocking the door locks on the vehicle. Hope
Question about Chrysler PT Cruiser
...key into the ignition switch and turn it to the ON position. Wait 10 seconds or until you hear a single chime and the vehicle security light stops flashing. Look for the indicator light on the ...
...key in the ignition and turn the key back and forth jiggle and wiggle it and see if your igniting will make contact. do it several time to test and see if its the ignition problems, this part is not ...
...Ignition cylindercylinder malfunctions, cause the operation of the key itself to become problematic. If the tumblers become stripped, the locklocklock cylinccylinder may be able to turn with any key, ...
key into the ignition. anay suggestions? please! The ignition switch that recieves the key is worn this is a replaceable item you may even need a mobil locksmith to come over and make a key now is the
...key use that and try turning the ignition on and leave the car set for 3-4 hours this will generally clear the lock out. If that does not work then you will need to get a new key from the dealer and ...
1,289 questions posted
Usually answered in minutes!
1,198 Questions
1,147 Questions
1,007 Questions
677 Questions
582 Questions