2003 Chrysler PT Cruiser "change oil pressure switch" Questions

Ad

Question about Chrysler PT Cruiser

2 Answers

...change the oil pressure switch ,also called oil sending unit first. this part is not that much and isnt hard to do.if that doesnt fix it then you might have an oil pump going out If there is an ...

Ad

Question about Chrysler PT Cruiser

1 Answer

...don`t hear any engine noise then its more than likely the oil pressure switch is acting up. this is likely a coincidence that it happened after the oil change. have the oil pressure switch

Ad

i change my oil in it will it stop comeing on and stop the binging I doubt changing the oil will make any difference. The warning light is telling you the oil pressure is low, or the switch is failing

Question about Chrysler PT Cruiser

2 Answers

...oil pressure you either need to add oil after checking to make sure you it because the oil light means that you are low on oil. if adding oil is not needed then the sensor is bad and you will need to ...

...oil pressure light comes on while stop for a turn or trarffic light and go off you give it some gas Check the oil level, if the oi level is good. Then it's a good chance that the oil pressure sensor ...

Question about Chrysler PT Cruiser

1 Answer

...Power steering pressure switch. How do I change this?? it is a small sensor on pump just need a ratchet and socket it is a one wire sensor like old oil pressur sensors just tug wire it will come ...

...oil change etc' but has broken down several times since then. the car just cuts out. i have taken it to 3 garages including chrysler and because no fault comes up on the diagnostic they tell me there ...

...change a timing belt in a 2001 pt cruiser 2.4 liter REMOVAL Disconnect negative battery cable. Raise vehicle on hoist. Remove right front wheel. Remove the right splash shield. Remove accessory drive ...

...oil/filter change. Is your oil level ok? It's unlikely to be your oil pump at fault. Check your oil level Is the vehicle due an oil/filter change? The oil pressure transmitter switch simply tells the ...

Question about Chrysler PT Cruiser

2 Answers

CHANGE OIL LIGHT.FIRST YOU SWITCH IGNITION ON. SLOWLY DEPRESS AND RELEASE THE ACCELERATOR PEDAL 3 TIMES WITHIN 5 SECONDS.WHEN CHANGE OIL LIGHT FLASHES INDICATING  OIL LIGHT RESET.SWITCH

Not finding what you are looking for?
2003 Chrysler PT Cruiser Logo

1,289 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Chrysler Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

john h

Level 3 Expert

29494 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...