1996 Jeep Grand Cherokee "throttle body 96" Questions

...fluid,the motor will stall when fluid is low Replace the idle air control (I.A.C) motor on the throttle body chk and change complete throttle body with tps and idle motor also chk vaccum ...

throttle body assembly from the vehicle as outlined in this section. WARNING To prevent spring pressure release, hold the regulator housing against the throttle body while removing the mounting screws

...whenn it got cold out.. it runs fine when its driving but if im stopped it shakes and jumps sometimes.. i have had my throttle body cleaned out already. Did you try a good set of plugs and

...Auto_Zone to make sure. Another cause of that kind of hard start is a dirty throttle body/ intake manifold. Use INTAKE cleaner and a rag clean the intake esp[eciall in the throttle body area. Good ...

...throttle body. O2 sensors are always on the exhaust pipe, one near where the pipe attaches to the exhaust manifold the other back near the catalytic converter. what size of oxigen sensor socket do I ...

throttle body.checked all vac.lines. THIS VEHICLE I,M SURE HAS A CRANK SENSOR LOCATED IN THE TOP OF BELLHOUSING AT BACK OF ENGINE A LITTLE TO THE PASSENGER SIDE THIS CAN AND WILL CAUSE THIS ALONG WITH

...throttle body and the intake valves. As you need more throttle less vacuum is created. The PCV ( positive crank case vent) works off this vacuum. At the back of the valve cover there is a vacuum line ...

...throttle body be cleaned with CRC intake cleaner, NOT CARB cleaner. While the engine is running, you would spray the throttle bore and surrounding areas. A common problem is dirt build up in this ...

...throttle body and once it starts it runs fine. I replaced the inline fuel filter and checked the injectors with a stethescope wile running and all were clicking fine. HELP!! This sounds like a weak ...

...throttle body while revving the engine. I don't believe in miracle cures from a bottle, but this was incredible and I had to share the experience, as it may be the answer to your problem. Rather than ...