1996 Jeep Grand Cherokee "straight 6" Questions

...Straight 6 4L how to r&r tps on 2002 Jeep Straight 6 4L & how to remove 3 wire connector from it. Connector has a release clip on it. Part itself is held on by two torx screws. Keep the new ...

...straight 6 and i am swapping the engine out for a 94 jeep grand cherokee straight 6 also was wondering if the computer can stay and the dificultys behind this project If you are reusing the same ...

...straight 6? My check engine light came on and my code reader says O2 sensor. I don't have a repair manual, where are they located on the straight 6? If you do not know where O2 Sensors are ,I ...

...but 2413 should also work. This is presuming it's not a 6 or 8 pot in there. if its a straight six it is usiually 1 5 3 6 2 4, hope this helps 6 Cylinder 1-5-3-6-2-4 8 Cylinder ...

...6 cyclindar straight line. I have replaced the timing chain on my 2000 jeep grand chereokee 6 cyclindar straight line. I have tried to start it and it still wont turn over. My son drove it and over ...

...straight 6 engine it is a 1996 grand cherokee laredo and straight six can't find any manuals on it in the internet? I suggest the public library. I have found it to be a great resource. Haynes ...

...code. which one is cylinder 2 in 03 jeep grand cherokee assuming you have the straight in-line 6 then the cylinder numbers are 1-6 from front to back if you have a different engine let us know ...

...in my '98 Jeep Grand Cherokee when changing the oil? should be 6 qrts for the straight 6 and 5 qrts for the v 8.. call a quickie oil change place in your area for verification is my memory is ...

...Cherokee straight 6? The torque converter holds about 4 -6 qt's itself.Not positive on your model would star with 4 then check.This is if you did not remove the torque converter, good luck to

...Straight) 6-Cylinder or the 5.2L V8; however I have included bothe below. For the 4.0L In-Line 6-Cylinder: Firing Order: 1-5-3-6-2-4 Cylinders: (back) |..6..| |..5..| |..4..| |..3..| |..2..| |..1..| ...