1996 Jeep Grand Cherokee "dakota 10 turn" Questions

10 degrees outside. Thought I would come to the internet for some help. Any ideas would be greatly appreciated! Start with the basics... Is there plenty of coolant in the system. Many people including

...10 minutes to replace. Best way to check it is to unplug it while it is running. If the valve is bad it will keep running. If it is good, unplugging it will shut the engine off, and that means it's ...

...Dakota has been somewhat confused about shifting as well. It showed a code P1762. I dropped the pan to install a new fluid filter and fluid-(use only ATF+3 or ATF+4). Since the pan was off I decided ...

Dakota Crank No Start Fix - YouTube ? 8:10 https://www.youtube.com/watch?v=a-rfAd0YLg0 Jun 29, 2014 - Uploaded by AJ Pierce In this video, I will show you how I fixed my 1992 Dodge Dakotanot starting.

turn signals won't work on 1996 dodge dakota truck CHECK TURN SIGNAL FUSE.LOOK FOR A BLOWN 10 AMP FUSE.

i cant figure out which fuses are for the turn signals in a 88 dodge dakota 2nd over top one #10 amp

...dakota maintain while running? Depending on the thermostat it has instaled in the engine it should run from 170 f to 190 f. 200 give or take. Sensors can be a little plus or minus so as long as it ...

dakota was sputtering. Wife put gas in it (it was low) and got home fine (10 mi.). started up this morn. and it died after .25 mi. Got it started and got it home. pump or relay? Did it run out of gas?

...dakota that blew out the rear end, where can i find the gear ratio for the new rear end that i need? I will assume you are missing your id tag. You will need to remove the rear cover and count the ...

...Engine heats up the it bogs down when you give it gas. Even in first gear. Turn off the ignition and turn it back on again and the truck is fine for about 5-10 minutes. need make and model to help ...