1996 Jeep Cherokee Country "stabilizer link" Questions

Ad

...link to the stabilizer bar. Repair Guides Front Suspension Front Stabilizer Bar AutoZone com Also join the Autozone site,it's free,then you can use their repair guides like me,need more help,let me ...

Ad

...link off the pitman arm.. The stabilizer leaks out it's oil and allows the steering to go into a speed shake. While you are checking that part out it would be a good idea to check your other steering ...

Ad

Question about Jeep Cherokee

1 Answer

2, one on each side. The stabilizer looks like a shock absorber but it fastens to the drag link ( between the tie rods) and to the frame. It can be gotten at most any auto parts store. Hope this helps

...stabilizer is working. No factory sway bar. Not sure what to do next. HELP! try a drop pitman arm. check your tie rods, and your steering box also check for pressure loss in the power steering DRAG ...

Question about Jeep Cherokee

1 Answer

...assemblies from known good Jeeps. Newly aligned with 4 new shocks, sway bar links, steering stabilizer, and rear springs. That didn't help. Removed front prop shaft, no change. All

...same at the steering box and idler arm on the frame and the drag link should come off. If you have stabilizers for steering control they need to come off first. Re installation is just the reverse. ...

...or not using "star" pattern when replacing a wheel. One item often blamed for this is the steering stabilizer (sideways shock on steering linkage) Though wobble will often cause the stabilizer to ...

Question about Jeep Cherokee

2 Answers

...stabilizer link from the stabilizer shaft. Disconnect the stabilizer link from the strut assembly and remove from the vehicle. To install: Connect the stabilizer link to the strut assembly. Tighten ...

Question about Jeep Cherokee

1 Answer

...link-to-front stabilizer bar nut. CAUTION: Use extreme care not to damage the ball joint boot. With another set of support safety stands under front sub-frame, remove two rear sub-frame retaining ...

Question about Jeep Cherokee

1 Answer

...stabilizer shaft link nuts from the stabilizer shaft. 4. Remove the stabilizer shaft insulator clamps from the front crossmember. 5. Remove the stabilizer shaft from the vehicle. Installation ...

Not finding what you are looking for?
1996 Jeep Cherokee Country Logo

414 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

1998 Jeep Cherokee
1998 Jeep Cherokee

1,380 Questions

1999 Jeep Cherokee
1999 Jeep Cherokee

1,162 Questions

1995 Jeep Cherokee
1995 Jeep Cherokee

698 Questions

2000 Jeep Cherokee
2000 Jeep Cherokee

672 Questions

2001 Jeep Cherokee
2001 Jeep Cherokee

659 Questions

Top Jeep Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

john h

Level 3 Expert

29494 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...