2006 Honda Odyssey "remove spring driver side door" Questions

...driver's side (manual) sliding door will not stay open. (Passenger side is fine.) Do you know what i can do? Also, is it possible to have a roof rack installed on a used 2006 Odyssey? Thank you!! The ...

...spring to pop the gas door open. I didn't want to mess up my storage compartment like danielbeaty, but it was harder. I took the kickplate off and the trim from around the rear panel, and a couple of ...

spring that was rolling inside the frame of my driver side door. When I put everything back together, my door no longer stays open on its own, When I open the door, it slowly moves back to shut.. Elio

...spring is broke. The only way to tell is remove the door panel and inspect the rod from the handle to latch. Look for broken spring on handle. I have installed an external spring from the handle rod ...

...spring. NOTE - I did not remove the door latch assembly from the door. I worked on it right inside the door. I attached the new spring with a couple of tie-wraps, replaced the fuse, and viola - ...

...remove with either a torx or a nut driver-second option you must slip in door panel clip removal tool to relase the spring clip-these fly if you don't keep be careful. clip tools are at most auto ...

...spring, resit it to retainer point as before you have to be very careful in order not to hurt yourself Remove tape from window and test up/down switch ( key must be on) Reseal vapor barrier in place ...

...spring compressor to remove the door "hold" spring. Once you have that removed, you can use a brass drift or similar rod to tap the pins out. once they are out the door will be resting on the wood. I ...

side door sags towards truck gradually so it is out of alignment by about 1/8-1//4 of an inch and will not shut Probably your hinge pins and bushings are worn out.Most parts stores sell hinge pin kits

...to get in with slim jim that then will allow you to remove the door trim the door lock is held in place with a large "C" shaped spring clip so getting the lock out from the outside is not an ...