2002 Chrysler 300M "brake lights working" Questions

...then you will have to check the wiring from the brake switch back to the rear lights.another thing is does the signals work at the back if they do then the signal switch is eliminated as a

...lights don't turn on. ( I checked the bulbs and they are not burned out) There is a plunger on the Brake Switch which is behind the Brake Pedal (arm). This can be checked and adjusted by "unscrewing" ...

brake lights don't work and i alreadyrepaired bulbs and nod still now working and all fuses are good what could be da problem? brake control switch...it located on top of the brake pedal...that switch

brake lights work only on one side, but regular lights work? Did you check the lamp bulb? The white wire with tan tracer is voltage for brake lamps. If the bulb is ok, have a helper step on the brake,

...brake lights don't. Checked fuses and all ok. Looked at wiring and all seems ok. Help! There is a switch above the brake pedal. This switch is for the brake lights. You can use a voltmeter or ...

...brake lights don't work, according to the cop who stopped him. Where is the fuse located and which number is it. Also is there a brake light switch that controls the brake lights located somewhere. ...

...working and brake and ABS light stay on Well, it could mean that the emergency brake has not been fully released.The ABS system light is on if something has occurred within the ABS system. Something ...

...brake lights. changed switch, not it. checked all fuses, not it. changed all bulbs, not it. Was burnt bulb on deck lid light though. Help Please! All other lights and signals work. Thanx. Dave Dont ...

Cruise control not working.. Airbag light on, cruise control does not work, but horn and brake lights work just fine. Any ideas? possible broken wires in steering column.

...to test is the way to a fix ,.not by i was told it could be a sensor . Brake lights stay on Not saying that this is your problem but look under dash at the switch .Check the switch an pedal arm