...Car Audio Rear Speakers Location: N/A Left Rear Speaker Positive Wire (+): Brown/Yellow Left Rear Speaker Negative Wire (-): Brown/Light Blue Right Rear Speaker Positive Wire (+): Dark Blue/White ...
Question about Chrysler 300M
...turn the wheel left or right the engine struggles and dies most times. It has the 3.5L V6 and the only thing I can think is the power steering pump is bad. What do you think? I agree unless the power ...
Question about Chrysler 300M
...left cover, upper right cover and lower cover. Loosen the timing belt tensioner bolts. NOTEBefore removing timing belt, be sure to align the sprocket timing marks to the timing marks on the rear ...
Question about Chrysler 300M
...turn signal does not work take the bulb and assembly out and put in left rear socket it works fine. Original left rear works okay when put in right rear it does not work. All other lights work okay. ...
...left-turn signal. The right turn signal's bulb worked in the left turn signal's socket, so I know it's not the bulb. Does anyone have any suggestions? I have a 98 Dodge Neon. Is there an individual ...
...turn signal does not work. The bulb and assembly from the right side when switched to the left side works fine. All bulbs and assemblys work fine on the left side none on the right side. loose wiring ...
...turn LEFT? Turning RIGHT puts the heavy load on the LEFT front wheel. That initially STOPPED the noise, correct? So why did you change L? Turning LEFT puts the load on the RIGHT. Did you change the ...
Question about Chrysler 300M
...left turn signal works right turn signal does not Left turn signal works fine, right turn signal does not work, does not seem to light. have you checked the bulbs front and back. to see if they work, ...
Question about Chrysler 300M
...left turn signals stopped working but the right side does work. Also the hazard signals on the left side do not work but the right does work. what should i do? The wiring for your left turn/hazard ...
...left turn humming noise when vehicle does a slight or just left turn. tire does not rub, break line not kinked, rotor hard to turn by hand, but that is the nut, someone tightened to far.Vehicle is a ...
624 questions posted
Usually answered in minutes!
949 Questions
313 Questions
272 Questions
170 Questions
107 Questions