2005 Pontiac Grand Prix "program doors unlock" Questions

Programmed key will not open 2005 Pontiac GP door Had a replacement key programmed at GM dealership. It will start the car but won't open the locked door. When the key goes in the door lock it will ...

doors only unlock occasionally. Using all the methods of key fob, button inside the car, and putting it in park. You need to understand how they work , do you know about automotive electronic controls

...doors one time to indicate successful programming. 5. Repeat step 4 for to program any additonal keyless remotes including and existing keyless remotes. Do not remove ground wire between programming ...

...program multiple receivers simultaneously, the same transmitter could possibly be programmed to more than 1 remote control door lock receiver.  Perform the following steps: Sit in the vehicle ...

program the factory keyless entry remote to work for the car????????? on the plug in point on the car where they connect scan tool use pin 4 and 8 jump them with papper clip this will cause door locks

...program multiple receivers simultaneously, the same transmitter could possibly be programmed to more than 1 remote control door lock receiver. Perform the following steps: Sit in the vehicle driver's ...

...program multiple receivers simultaneously, the same transmitter could possibly be programmed to more than 1 remote control door lock receiver. Perform the following steps: Sit in the vehicle driver's ...

...program the them again. 1. Remove the key from the ignition. 2. Close all doors. 3. Remove the "MALL PGM" fuse from the fuse panel. Use the legend on the fuse panel or owner's manual to properly ...

program mode. This prevents the programming of the transmitters to the incorrect vehicle. Remove the ignition key from the ignition lock cylinder. Close all of the doors. Remove the MALL PGM fuse from

...program the them again. 1. Remove the key from the ignition. 2. Close all doors. 3. Remove the "MALL PGM" fuse from the fuse panel. Use the legend on the fuse panel or owner's manual to properly ...