2005 Pontiac Grand Prix "coolant system bleeder" Questions

coolant system (usually on the water neck); newer systems are very hard to get all the air out of. if you've got one start the car with reservior full and heater temp switch on hot, open bleeder until

...system there should be a bleeder screw on the thermostat housing start your car let it idle a few min then open the bleeder.(repeat until you. Just get coolant allowing a min or two between each time ...

...system as the engine heats up. When a steady stream of coolant starts to come out of the bleeder valves, use caution not to get burned and close the bleeder valves. This is my own experience. There ...

...system. There may be two bleeder valves one for sure is on the pipe that comes out of the back of the water pump and there may be one on the T-stat housing where the upper hose attaches. Open both of ...

Coolant system Running hot - may be air locked - How do you get the air out of the system? May have a bleeder on the intake manifold to loosten up on the drivers side. Otherwise take radiator cap off ...

...system . On top of the thermostat housing is a bleeder valve , with the engine up to temp. open valve till coolant comes out . Is the coolant full ? What color is the coolant ? Have see where coolant ...

...bleeder valves located in the system..usually two or three allow you to purge all air from the coolant system. Check your radiator cap. If you replaced the pump and thermostat why skimp on a new

...coolant system and if problem is still there you can buy a kit to check the head gasket it hooks to the coolant system and you pour a liquid in it and if it turns from blue to yellow it has a head ...

bleeder valve on thermostat housing what does it do? IF you replace all the coolant, you use that to get the air out of the system..

...coolant system start car turn heater on high and let it run working back in forth between the two bleeders opening one at a time until all air is removed add coolant as needed make sure you bleed ...