2000 Ford Windstar "replace ball joints" Questions

...Windstar? YOU HAVE TO REPLACE WHOLE LOWER CONTROL ARM IF LOWER BALL JOINTS IS DEFECTIVE BECAUSE LOWER BALL JOINT IS SEALED AND IS A INTEGRAL PART OF THE LOWER CONTROL ARM BOTH IS COMBINED A ONE

...you can buy them either way, ask yourself if the control arm bushings are worn, I personally don't like doing things twice, so I would replace the control arm with the ball joint, it's not a hard

...if the frontend shakes when braking you need to replace the ball joints, if you can feel a pulsate in the brake pedal, then the rotors need changed.. but if it shakes its definately the ball

...replace the passenger side ball joint and cant afford to bring it to a shop, but none of my freinds can do it unless it happens to be a bolt in rather then press in. curious if you happen to know ...

replace lower ball joint pull lowerball joint pin. seperate with pickle fork. remove the 2 lower control arm bolts. remove lower control arm. reverse to install. yes the entire lower control arm must ...

...for you. Hope this helps The ball joint is integrated into the lower control arm and cannot be replaced separately. In many ways, that makes this project a lot less complicated (especially ...

...to tell which joints are greasable. But, the parts that could have a zerk fittings on your van include the outer tie rod ends, and lower ball joints. So just take a look and grease where

...ball joints for wear, also. Or you can raise the wheel off the ground.  Be safety conscious. Grab the tire at top and bottom. Can the tire move in and out, feel play in the lower ball ...

front end troubles just passed a safty inspection, but when my 2000 windstar goes over the small pavement cracks it has a loud bang. replaced the sway bar bushings now what??? Check the ball-joints.

Relaced the spring in front; still popping and squealing noise. What is it? Replaced the spring on the front passenger side. There is still a popping and squealing noise coming from that side. What ...