...battery is weak. The clicking noise is the starter solenoid engaging rapidly as it tries to engage starter but battery is too weak to turn engine. Could also be a bad connection to battery. Either ...
Question about Nissan Pathfinder
...weak week but flow and blower feel and sound OK.] we could never guess, we/d have to look. Some A/c need to be recalibrated after battery pull. and is step one that battery pull.....(neg lug off, ...
weak battery but testing needs to be done to find the problem. just a note but these trannys are none for being bad.they blow apart internally. i would have a ****** shop check it out maybe its just a
weak or dead battery, or a dirty or corroded connection to the battery. Before you go any further, turn your interior light on, then try to start the car. If the light is dim or goes dim when you turn
Question about Plymouth Cars & Trucks
...weak/failed/diconnected battery, then that would explain why this particuar code set in memory and you can disregard it. P1784 = Low / Reverse pressure switch circuit. What it means is there is a ...
...battery has a good charge, but the started would either sound weak or do nothing at all.To check or possibly fix a weak connection, first find the cable connections on your starter solenoid and make ...
Question about Jeep Cars & Trucks
...at -40F starter overloaded a weak or discharged battery.... (heard the starter run slow, did you?) it means battery voltage discover too low for any reasons.,. P161B-BATTERY DISCONNECT / TCM ...
Question about Buick Cars & Trucks
battery: A weak or dead battery can cause the car to not start or display incorrect information. Check the battery and replace it if necessary. Contact a mechanic: If none of the above solutions work,
...weak making it hard to steer the car but not difficult, and so far only once has my car turned completely off while I was parking at a walmart. Turning it off then back on had worked to get the car ...
...battery is weak or dead make sure battery cables tight and clean them if you see a lot of corrossion use baking soda and water neutralize corrossion remove battery cables clean them with wire brush ...
293 questions posted
Usually answered in minutes!
716 Questions
599 Questions
586 Questions
405 Questions
397 Questions