1996 Nissan Maxima "ford ranger rough idle codes" Questions

...Ford Ranger V6 3.0 I think the coil pak is outta whack do to the firing order dont know what the firing order is rough idle in park and in gear but none when driving ran codes says number 2 misfire ...

...ford ranger idles rough, high then low My 1998 ford ranger idles rough. When i am at a light or in park, it idles high then low, high then low. What can it be? does car have engine codes? sounds like ...

...ford ranger 3.0 v6---- rough idle Please help!!! Engine idles slightly rough and seems to lack power on take off. OBD shows no codes at all. Changed plugs, wires, cleaned throttle body and ran ...

ranger problems check engine light on and idling very rough check engine light is on and idling very rough? run fault codes and check for O2 sensor problem and MAP/MAF sensor problems. If it is ...

...ford ranger 2.3 liter 2wd when was the last time you had a good tuneup sparkplugs,wires if needed and fuel filter and replace the drive belt and also make sure all of the vaccum lines are on and the ...

...ford ranger 2.3 codes po171/ andpo301 #1 , changed plugs/wires/upstream oxygen sensor.cleared codes drove 30-40 miles and still get same codes runs great but rough idle P0171 FORD - Fuel Injection ...

...Ford Ranger 4 cylinder Part 3 -How to Test the Ignition Module and Crank Sensor ... easyautodiagnostics.com > Ford > 2.3L Mar 1, 2012 - Spark plugs for cylinders #2 and #3 get spark at the exact same ...

ford ranger check engine light is on and engine is idling very rough Have the engine codes scanned. Most auto parts stores will scan the codes for you.

...Ford Ranger runs rough. I replaced the motor and computer, runs rough but idles. If I give it gas it revs up but as soon as I let of the gas pedal, it cuts off like it's idled too low, maybe TPS? ...

2002 ford ranger 4x4 4.0 v6 engines codes read lean on both sides. engines idling rough and already changed MAF sensor but didnt use ford parts. any suggestions? have you check the fuel pressure?