1999 Ford Windstar "ac compressor wires" Questions

Ad

...compressor clutch is not engaged. If not engaged, no ac.

Can you check for applicable hvac codes? To check codes, your-self, at the least, you need an obd2 code reader, that will check ...

Ad

...AC Compressor kit. Was told that you can't bypass it. Is this true? because of the way the belt is routed the ac compressor can not be bypassed by using a smaller belt. So that leaves you with 2 ...

Ad

ac compressor has seized internally so all you should have to do is disconnect the wire that runs to the back of the clutch coil behind the pulley. This will allow the pulley to free wheel and just be

Question about Ford Windstar

1 Answer

...ac worked fine in the past, now it doesn't. I checked freon level, pressure switch, It's fine. I have no activation of the compressor, I was a class A tech years back, and I haven't done this type of ...

Question about Ford Windstar

2 Answers

...ac compressor wiring and tried again, blown again. Any suggestions? I had the same problem with my 2000 Windstar. It ended up being a brake fluid leak around a sensor on the master cylinder. The ...

...ac in a 2000 ford windstar Hi Jenni,If you have a bad or locked-up A/C compressor, you do not have to change the belt at all unless the clutch bearing is bad.  Otherwise, the belt will simply ...

Question about Ford Windstar

1 Answer

ac compressor taking that out of the cause... I would also disconnect the cruise control wire to the unit and drive aroud for a day or so to see what happens. This is whats known as isolate and test .

...AC COMPRESSOR CLUTCH COIL WIRE CONNECTOR HOOK UP.IF AC COMPRESSOR CLUTCH COIL WIRE CONNECTOR HOOK UP WRONG OR WIRE HAS A SHORT IT WILL BLOW THE ECM FUSE AND AC COMPRESSOR FUSE.CHECK FUSES AND AC ...

ac compressor not switching on 1986 Peugeot 505.GTI How can I test clutch wiring,. Have just aquired this car , heater blowers etc. working but ac clutch not cutting in, is there a switch I have not ...

...AC COMPRESSOR. electrical connector at salvage yard or dealership connect long jumper wires to the AC COMPRESSOR electrical connector.i hot wire it. let dealership do the job they can use scanner ...

Not finding what you are looking for?
1999 Ford Windstar Logo

1,790 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

1998 Ford Windstar
1998 Ford Windstar

1,830 Questions

2001 Ford Windstar
2001 Ford Windstar

1,838 Questions

2000 Ford Windstar
2000 Ford Windstar

1,503 Questions

2003 Ford Windstar
2003 Ford Windstar

1,032 Questions

1996 Ford Windstar
1996 Ford Windstar

600 Questions

Top Ford Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

xxxxxx xxx

Level 3 Expert

5117 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...