1991 Volkswagen agon "fuse controls ac compressor new" Questions

...compressor when i switch on the a/c at the control panel on the dash. i can't find any blown fuses. a relay may be bad but i can't find any diagrams showing which relay is for the a/c system. thanks. ...

...controls to not send the 12v to start the compressor? Defective AC fuse, relay, pressure switch (low/open), intermittent compressor wiring (check connections and harness), bad control

...controls the fans, their speed, the compressor,and the hi/lo pressure switch. both of these parts a a common problem for the beetle. With regard to the AC, the problem may be the control unit, but it ...

...fuse for the AC on 98 Olds 88? The AC works when a new fuse is in but then somehow the fuse blows and all the fan will blow is hot air. Put in a new fuse and it's cold air again. So what does ...

...fuse which controls the air conditioning & heat area keeps blowing immediately once replaced. Any ideas? this fuse probably controls the ac clutch operation and/or the blower fan motor.. ...

...AC fuse in the fuse box under the back seat. Go figure... I just had myself and 2 mechanics trying to figure this out. new compressor, no power from computer. reseating the fuses (HVAC #) in the rear ...

fuse. Now AC light is steady for a few seconds, then blinks and soon blows fuse. This fuse powers the control system and compressor clutch. Odds are you need a new compressor clutch, but you can try a

...fuse blown I think you're going to need a new cluster. I don't have your wiring diagram, but my 2000 camaro wiring diagram is below. It has a logic device built in that controls the temp and fuel ...

...fuse, low refrigerant, bad ac switch or even a bad compressor. You have to start eliminating the possibles. Start with the easy/cheap things first like fuses. I have a good updated code file and find ...

...ac compressor working high pressure switch which cuts the ac clutch if the head pressure goes too high low pressure switch which cuts power to the ac compressor if there is no gas in the system ...