2003 Ford Ranger Regular Cab "blend door problems" Questions

...blend door and or the little motor that moves the blend door. The blend door moves back and forth between the AC core and the heater core to provide a mix of hot and cold air or hot or just cold ...

...Blend Door Failure No Heat or no AC (dependes on where door sticks) In all modern cars there is a tiny DC electric motor driven gear drive that moves a plastic door that blends heated and cooled air ...

blend door problem. The first thing to have down is have the AC system pressures checked and the rate of cycle on the compressor, if this all checks ok you may have a defective air temperature control

...blend door acuator or the blend door shaft that the electric actuator moves has broken, this door is what shuttles between the heater core and the AC core and provides either heated or cooled air, or ...

...blend door actuator and/or the blend door to the actuator connection is busted. The actuator costs about $70.00 and blend door replacement about $15.00 from NAPA. Dealers and shops charge about ...

...blend door and the electric actuator that moves it, which takes all day and u must remove the dash or you can install an after market kit that resolves the problem is about 2 hours, here is a link to ...

...blend door actuator motor, the next is the actual blend door, the shaft that the electric actuator moves is snapped off due to the door binding, both problems cause no air temperature control and you ...

...Blend Door Most of the time my heater works fine. During very cold weather, I don't get much heat. My Ranger has an electrically controlled blend door. My mechanic has checked and flushed the heater ...

...blend door issue.  Either the blend door is stuck, or the actuator that is suppose to open and close the door is broken / no longer working.  Common problem, and causes a LOT of headaches. ...

...blend door. Is this a high probability as my problem? Check if the blend door is working, do you hear any operation or change when temperature setting is changed? If not, possible blend door problem. ...