2003 Ford Windstar "03 running bad" Questions

Ad

...03 windstar. Now the message center will not work, it is completely out. If it is a fuse I couldn't find one that was bad. Make sure you check the owner's manual for "running your car after replacing ...

Ad

...03 Windstar was running rough and diagnostics indicated plugs / wires were bad on cylinder 1 and 2. We changed out the plugs and wires on all of the cylinders with Motorcraft SP-486 plugs and Omni ...

Ad

03 windstar rough idle working bad,worse in the rain codes 171, 174, 301 .i just changed the plugs and wires, seemed too work a little better, didnt last long now i have no power going up hill or ...

Question about Ford Windstar

1 Answer

03 ford winstar inspected i went to autozone to have them check it and they said its po171 and my van is running lean on one engine bank only allready changed the air flow sensor and still having this

...running if the engine dies your alternator is bad which i suspect is the case if not then most likely there is either a broken ground a bad wire or a hot wire shorted to ground --good luck Ford ...

Question about Ford Windstar

1 Answer

...reads mult. misfires. 03 eco tech 2.2 remove the plugs and inspect them for white deposit, means a bad head gasket, but run a compression check to be sure, if good then go it ignition and ...

...03 Chevy Malibu is running the blinker sound comes on even when i'm not using the blinker... it's been doing this for about a month now and it's very annoying... can anyone solve my car problem??? ...

...03 Grand cherokee limited 4x4 4.7L. I am hearing a loud whine when in idle or acclerating. I have no electrical or acceleration issues but whine appears to be getting louder pull belt off and turn ...

Question about Ford Windstar

1 Answer

...03 supercharged engine keeps sending the same troble code which is bank 2 is lean I reset the mil but it will come back on in about 50 milesI have used injetor cleaner fuel pressure is 30 to 40 lbs I ...

03 5.9 diesel cummins, I have a bad injector but i dont know which one.what is the easyest way to change them if you will get a wrench and then with engine running, loosen the fuel injector lines 1 at

Not finding what you are looking for?
2003 Ford Windstar Logo

1,636 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

1998 Ford Windstar
1998 Ford Windstar

1,830 Questions

2001 Ford Windstar
2001 Ford Windstar

1,838 Questions

2000 Ford Windstar
2000 Ford Windstar

1,503 Questions

1999 Ford Windstar
1999 Ford Windstar

1,212 Questions

1996 Ford Windstar
1996 Ford Windstar

600 Questions

Top Ford Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

xxxxxx xxx

Level 3 Expert

5117 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...