2001 Ford Windstar "hole exhaust" Questions

...exhaust grind the pan where the hole is and wire brush an old copper penny and use ( J B weld ) epoxy http://www.jbweld.net/index.php to stick the penny over the hole, then with a hammer tap the ...

why exhaust is coming inside van you may have a hole in the exhaust. is the exhaust . where are you smelling it .in the fron or back

...hole in the center.These are the EGR ports and if they stop up you will have all the recirculated exhaust gasses going to basically one or 2 cylinders which will dilute those cylinders to much thus ...

exhaust. thats about the only way to get to them I had a chevy truck that used to do the same thing.. I replaced the fule pump, distributor , and put a lot of $$$ in it before a localechanic found the

hole will leave evidence. 5) check that all the hoses are good and that there are no leaks where they are attach and that all jubilee clips are tight and intact. 6) Check the foot-wells of the car for

exhaust putty which can be purchased from most auto spare part stores. Bigger holes and cracks can be welded with mig and also patched with metal plate cut to cover the hole (about half an inch larger

your headers completely ( pain depending on your car ) and check them for holes, or you can take it somewhere and have them checked. Other than that it could be a hole in your exhaust/exhaust manifold

I need to change the entire exhaust system? Change only the muffler if it is worn out,rusted,or has holes in it.Only change the exhaust if you see holes,cuts or any other place leaking exhaust. Make a

...hole in exhaust no hole in exhaust it sound like its coming from engine where the exhaust pipe goes into a box its really loud any ideas sorted the problem there was a bolt missing out from where the ...

...hole in exhaust pipe, is there a high There's a small hole in exhaust pipe, is there a high temperature silicone that will hold? There's a pudding and wrapper you can buy at parts store, the ...