...2 wheel drive, 2002 Ford F-250 Diesel myself and need some directions. what I do is put a glob of grease in the palm of my hand and push bearing down in to grease untill you see the grease come out ...
...cotter pin, then remove the hub nut. When you put it all back together you will want to change the grease seal at the back and clean and re-pack your bearings. Make sure you look at your bearing ...
front manual locking hubs 1990 f-250 what type of grease or lube do i use when servicing the hubs. Hey, I also have a 90 F-250, manual locking hubs. My repair manual says to 'be sure to apply a light ...
...end cover off the pump body and fill all around and in the teeth spacings with Vaseline or clean grease. This fills up the spacing between the gears and the body where the oil is moved and creates ...
...after it drys out comes back. No performance issues noted. it might be that your mechanic didn't grease the brake tips when he installed them... which means what when the brakes move back and
...on coil. 2. remove bolt holding down coil 3. twist and pull to remove coil 4. apply di-electric grease inside new coil 5. press onto plug 6. apply di-electric grease inside electrical connector
Spacer Needle Bearing Seal 4 3123 Bearing, Caged Needle 5 3105 Front Wheel Spindle 6 1190 Wheel Hub Grease Seal 7 4221 Inner Wheel Bearing (with Bearing Cup 4222) 8 1102 Front Disc Brake Hub and Rotor
...in the back, front bearing should fall out in your hand ,with the rotor off gently pry the rear grease seal out (have a new one on hand they damage easy) remove rear bearing. Clean all the grease ...
...and reassemble the shaft with the same marks lined up. If you did not mark them possibly the grease or rust from the failed joint has spotted the flange. If you see the grease or rust marks
845 questions posted
Usually answered in minutes!
907 Questions
705 Questions
442 Questions
465 Questions
399 Questions
