1985 Ford F150 "ignition change" Questions

...column will have to be removed from truck to replace.Availible from Ford or parts stores--ASK for plastic ignition actuator-metal one is for 1987 to 1991 F150s. Change it cheap and easy to ...

...most common problem is the ignition module(on the distributor) or the pickup coil. The pickup coil is inside the distributor and it is necessary to remove the distributor and it's shaft to change

electrical starting problem, 1988n ford f150 4.9 ltr. I keep getting secondary Ignition. I brunt one starter out already changed it & the starter relay switch , checked ignition switch [o.k], ...

...change the ignition module next Hi Check your if your ignition module is getting power. If it does, your may have found your problem. Good Luck!! make sure the solenoid is wired right, only starter ...

...The ignition module may be a good place to start considering the part is only $40 dollars and takes about 10 mins to change. On the front of the distributor right at the base. (frnt of the

...the ignition key lock assembley but it did not fix the problem. you might have to change the steering colum...i would do that first...sounds like there is a problem in it (maybe a bent

1991 F150 Will not crank. Truck lost power while driving, had it towed back to the house. Changed ignition module, spark plugs, fuel-pump reset switch, and the female end of the fuel-pump relay, still

ignition coil--ECM ( all causes for the both) going on this check out the coils and check that the wiring and connections are clean and tight. basically I would be inclined to change out the coils and

the list. Also check your plug wires, or change them. Check your air filter, and change the fuel filter. It could also be your egr system, faulty ignition coil, or a vacuum leak at the intake manifold

...change the ignition switch or the ignition lock ( cylinder& keys) to my 2001 ford f-150 i put some wd 40 in the ignition and it worked for a while but now it wont start they told me it was the ...