...the flexible rubber mud guard inside the wheel well to change the plugs, basically the only way. The front plug is a real pain but between working through the wheel well and from up top, its
Question about Cars & Trucks
Front wheel studs on 2000 Mitzubishi Mirage won't go past mud guards Can't get studs in past mud guards please get more on your problem
Question about Ford Explorer
...front half, 5 on the wheel well itself, and two on the bottom, retaining screw to the bumper, now depending on which side you're looking at anywhere from 5-7 plastic pop-its. Use a flat tip screw ...
...front of my vehicle only when going forwards. Hit the brakes and they feel fine and no squeeling or anything when i hit them. Any ideas? Check the wheel wells and see if a mud flap or a splash guard ...
...it click and not start like you have dirty battery cables or a battery to low to start the car? remove the right front wheel and mud guard and check the ground on transmission it is possibly ...
...WHEEL TOWARDS ENGINE ALL THE WAY AND REMOVE TWO PLASTIC SCREWS FROM THE FRONT BUMPER HOLDING PLASTIC UNDER THE MUD GUARD. PULL BACK THE PLASTIC FOR ACESS TO THE HEAD LAMP. REMOVE COVER. TURN IGNITOR, ...
front fender/mud guard don't have to come off? Don't call me Surely (little joke there) but indeed, the fender/mud guard have to be dealt with. Here's the procedure: 1. If you are changing the bulb on
...front wheel well? If the plastic section of the wheel well is removed, will the battery have enough room to lift upwards or must the wheel be removed so that the battery can be taken out horizontally ...
front wheel. You might need to remove the plastic mud guard. It would be easier to see if you jacked it up and put it on jack stands. it comes out under car on pss side look for a small hole or in the
2,501 questions posted
Usually answered in minutes!
2,998 Questions
2,307 Questions
2,248 Questions
2,302 Questions
1,369 Questions