2006 chrysler pacifica touring randomly makes a clicking noise when go to start up the car

With that many codes and those specific codes I would suggest finding a reputable transmission shop. I suspect either a wiring issue or a bad trtransmission control module. A good shop should be able to determine which in just a couple hours or so.

chrysler Pacifica have emergence cut off switchusually located in the trunk area, these are activated by either hitting something or being jolted..

I would need to hear what the noise was to diagnose this.

How To Lower Your Spare Tire - YouTube

? 1:27
https://www.youtube.com/watch?v=6rLi0I7vRIw
Mar 30, 2011 - Uploaded by Garden City Jeep Chrysler Dodge Ram SRT
The staff at Garden City Jeep Chrysler Dodge are ready to help you. ... Garden City Jeep Chrysler Dodge has The Can-Do Crew show you how to lower your spare tire. ... Pacifica, Durango, Charger and Liberty for the Hempstead, Queens, Brooklyn ...Installation of a Trailer Hitch on a 2006 Chrysler Pacifica ...Missing: nut ‎sided ‎adapter ‎stored

Fix a Flat Tire: Chrysler Pacifica - CarCareKiosk

www.carcarekiosk.com/...Chrysler_Pacifica...3.../change_a_flat_tire

Free video on how to fix a flat tire in a 2005 Chrysler Pacifica Touring 3.5L V6. Complete instructions for using the jack kit and spare tire in a 2005 Chrysler Pacifica... Most Chrysler jack kits include the jack, a jack handle and a lug nut wrench.

trasmission fluid rarely need servicing unless it is leaking, you need to start the car and leave it in neutral let it warm up at least 5 minutes then check the dip switch, there is mark where it need to be at. if you overfill it will damage all the seals, and if it is to slow it will start slipping and eventually burn the transmission

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/tony_a41fa0b801734e2f

Might be a simple as e worn out muffler

Have you changed the factory fitted fan before?

Its the connections to the battery. Have the SAME car (had 3 of them, actually), with the SAME problem. Any other weird things happening....or questions about the Pacifica.......I have become an absolute EXPERT, lol!

if you already removed the bolts that attach it to the spindle then you need a bigger hammer

take to shop to have it reset