1999 Ford Taurus "replace clutch master cylinder 99" Questions

...master cylnder. This helped the problem, but didn't fix it. Replaced the clutch, pressure plate and throwout bearing. When I reinstalled the slave cylinder there is no clutch pressure until ...

s own weight. If the pedal returns, it's typically a clutch slave cylinder issue. The best thing to do is to replace both cylinders so that you'll not have to worry about either cylinder failing again

...clutch hangs After replacing clutch master cylinder on 99 civic si, clutch pedal does not always come completely back out. you may still have an air pocket in the line try bleeding it a little ...

...a sudden problem with no previous indications then I would think that the problem would not be the clutch but the action to the clutch. Replace the cable or master cylinder (and bleed out the

resovoir if it is low,you may have a bad clutch master or slave cylinder.If ther is plenty of fluid your clutch may be worn.You need to replace the clutch master and slave cylinders together as a pair

...Replace your clutch hydraulic cylinders, and you will be fixed right up. Thanks for choosing FixYa for assistance today. Ck to see of you have fluid in the clutch m-/master cylinder if the is non one ...

...replace the clutch. The car has only covered 40k since new. Possible solution! Daewoo Lanos 98-99 Had the same problem suddenly the clutch pedal went rock hard! The clutch was around 3 months old. ...

...clutch master cylinder where the compensating port is blocked if you have not fitted a new clutch master cylinder try that another thing is that an f550 is a heavy duty truck so clutch work will ...

...of my clutch slipping? You need to replace the master and the slave cylinder and replace the clutch disc and pressure plate they are worn out. probably not unless the fluid is getting on the disc ...