...Analyzer to do so. Leave the timing alone unless someone has already changed it at one point in time or another. There is no timing adjustment as the timing is controlled by the engine control ...
timing chain I have a 1991 Ford Tempo with 78,000 miles......do I need to change the timing chain? Timing chain does not need to be replaced like a timing belt. It will only need to be replaced if it ...
timing an 88 Ford Tempo? The timing marks are on the torque converter, you need to remove the little rubber oval ashaped plug to see them, set timing to 10 BTDC with igntion timing shorting bar ...
i have a 87 ford tmpo thatt wont start. i have spark and fuel. the water pump belt broke and my son could not get it started ever since. the compression on the plugs is low at 35psi i am trying to ...
Won't start Replaced ICM and Coil. Car will start fine a few times then when turning over no spark. Disconnect battery to reset ECU and again car will start a few times. There is no set sitting ...
ignition time how can know the ingition time for my car 89 ford tempo 2.3Lts. FI timing is 10 degrees
Timing won't stay set on 1994 ford tempo. Put on a new distributor. Tried setting timing and it won't stay. what do you mean it wont stay? Once you bolt it down, the timing cant move.
...and starts quite easily after the car has been driven and the engine has warmed. However, the first time we attempt to start the engine the engine takes some time, has to turn over multiple time, to ...
...light flickered briefly (so quickly I almost missed it.) It was about -10 (-32 windchill) at that time. Could this be from the cold, or should I call my mechanic? Any ideas? Thanks. I would not ...
How do ou time a .92 Tempo 2.2 where are the timing marks and how much advance do you need The timing marks should be on the crank pulley, and you would pull the plug for the Spout near the ...
225 questions posted
Usually answered in minutes!
316 Questions
207 Questions
136 Questions
115 Questions
112 Questions