1998 Dodge Ram 1500 4WD "loose fan pulley" Questions

...fan is hitting something, but I checked that. It gets worse when I rev the engine. Sounds like coming from the lower part of the engine. check the idler pulley bearing, loosen the serpentine belt and ...

...fan belt on 1998 dodge ram 1500 Moist adjust via the alternator mount, Use a pry bar to pull the belt tight and tighten both bolts to keep it there. I have a 98 Dodge Ram 1500. I just did a complete ...

fan will tighten itself onto the water pump. anyway what i do is leave the serpentine belt on the the pulleys and that will kinda hold them steady whilst you put the "special" wrench on the clutch and

...pulley it's worn out. Had that problem not too long ago, and it was the condensor fan motor ,under the hood. Cost of motor at supply house was about $100.00. and had to be ordered. Change out was a ...

...fan that is loose at the front of the pulley or the pulley is loose at the water pump. If it loose at the pump then replace the pump. And all of the pullies should turn, with the exception of the ...

loose. reverse procedure to install. There is also a large nut that connects the fan to the pulley this can be difficult to remove if you remove the pump from the block first. Remove the fan bolt with

shut off I can grab the fan assembly and the whole thing is loose. The bolts holding the fan on are tight. If the pulley is loose and the bolts are tight, chances are the water pump bearing has failed

...pulley while you loosen the other two bolts. Once loose, you can easily remove the bolts while holding the pulley with your hand. Charlie there are pulley holding tools and a wrench to loosen fan ...

vortec 4200 service manual Fan pulley loose,but four bolts that hold fan on are tight,like something is loose behind pulley on my 2005 chevy trailblazer/vortec 4200

Fan and belt pulley on 2002 envoy is loose, is it the water pump! No leaks. Fan and pulley loose, no water leaks. Yup. It hasn't started leaking yet but it will soon. Get the pump replaced.