1994 Volkswagen Jetta "vw wipers" Questions

...VW Jetta 4 cyl. remove wipers. remove plastic covering by loosening plastic screws first. unplug wiper motor wires. there are about three 10mm nuts at the motor location and you also have to unscrew ...

Intermitent Wiper does not work I recently purchased 1998 VW Jetta, the slow and Fast speed wiper works fine but intermittent wiper does not work. Thanks for the help the most common cause of this is ...

...wont work wiper motor humms but wipers wont move i can move them with my hand very easy and fuse is ok tighten the wiper arm nuts vw know for loosenign up. don't wipe ice off or it will happen ...

2006 vw jetta wiper problem wiper still dont work even replace the wiper moto and wiper switch in 2006 jetta check in hand book for relay position

...VW Jetta wipers do not move, but I can hear the motor. SOUND LIKE WIPER MOTOR ARM NUT LOOSEN OR MISSING OR WIPER LINKAGE COULD BE BINDING DAMAGE OR LINKAGE NEED LUBRICATION. USE WD40 SEE IF IT

2000 VW jetta wipers stop in middle of windshield wipers nut came of and when replaced the wipers now stop in middle of windshield sounds like they need to be re-adjusted

Adjust travel of wiper arm on 2001 vw jetta Adjusting for more or less travel isn't possible , but you can remove the arm off the stem and reposition it slightly to improve windshield coverage... ...

...wipers wont work 2000 VW jetta VR6 windshield wipers wont work first try the fues box see if you have a blown fues, next if you put your wipers on can you hear the motor running for them? if you can ...

...wipers on 2007 VW jetta not swiping The windshield wiper on the driver's side of my 2007 VW jetta is not swiping. It comes up about half way and then the passenger slide blade gets caught in the ...

...vw jetta, when i turn on wiper blades i can hear the motor but the blades are not engaged Wiper motor arm disengaged or slipping on drive shaft. Wiper arms slipping on splines at pivot point of wiper ...