1993 Volkswagen Eurovan "seat problems fixes" Questions

the passanger seat wont go all of the way back any more. I believe the lever that allows the passenger seat to slide all of the way back has become disconnected or broken. Has anyone encountered this ...

...HELP!!! Turns out the problem was a broken wire at a junction below the carpet below the drivers seat. Took my mechanic 4.5 hours to fix it nightmare had to take seat out handbrake lever etc to

2013 F150 F150 FX4 - When I press the drivers heated seat indicator on the display it lights up but starts the seat cooling system. The passenger seat works properly. How do I fix this? There are a ...

Driver seat heated seat does not work. It is on for 3 sec and then trips out or shuts off. The passenger seat is fine. Any idea of what causes this and how can I fix it? I have the same problem with ...

rear middle seat belt in 2005 jeep grand cherokee will not work My Rear middle seat belt is in the lock position and will not pull out to use. I put the seat down to haul something and when i put the ...

Looking for the location of the airbag seat sensor for a 2005 Hyundai xg350 (w/heated seats). Is it located in the seat cushion or the seat back? Unsure of where to locate the airbag seat sensor for ...

...seat belt to become stuck. You'll want to check the latch for any visible damage or problems and try to release it. If you are unable to fix the problem, I recommend having a qualified mechanic ...

... anyway to reset that without going to dealer - occurred when someone tried to adjust the passenger seat. the light is on because there is a failure in the system look under the seat for an unplugged ...

My problem is locating d anchor /tether where my baby car seat can be firmly attached in the toyota camry car seat. depends on the type of baby seat used ,some use the cars seat belt but older types ...

blown fuse fuse for door locks, and power seats in 1997 bravada I had the same problem and I was talking to a neighbor, and he had a 97 S10 and he said he had the same problem and it was the motor for