2006 Ford F-150 "seafoam engine treatment" Questions

...Seafoam Motor treatment. This article will tell you exact how to use it to remove carbon deposits from your engine. ...

...Seafoam" should help to clean up any carbon or junk in the engine. When you change the oil again, add "LubeGuard Engine Treatment". This should help stave off the engine replacement blues. 1st Step, ...

...Seafoam" this time(It cleaned your engine of carbon and junk on the 1st o/c). Then buy a bottle of "Lubeguard" engine treatment. This will fix you right up. Do not use cheap oil or filters on these ...

Seafoam Engine Treatment. Add 1.5 Ounces to each quart of oil. That would be 9 ounces on your Ford. Add it directly to the engine oil. Drive the vehicle for 200 miles and then change oil & filter.

...would stall and engine as the temperature vary. check egr and pcv valves they will cause rough idle and stalling put some seafoam fuel treatment in your gas tank also helps .change the fuel filter ...

...Seafoam to the crankcase for each quart of oil the engine holds. Drive your truck 50 miles and then change the oil/filter. Repeat the procedure and then drive the truck and check the oil regularly ...

suggestions? Give it a Seafoam treatment - the stuff is available at the auto parts stores and at Walmart. Instructions are on the can - it's an easy procedure that can work wonders on an older engine

...Seafoam Engine Treatment which can be found at most auto and marine stores plus Walmart. Add 1.5 ounces for each quart of oil in the engine. Drive the truck 50 miles and then change the oil using the ...

...throttle body cleaner or what best works is Deep Creep from Seafoam and would not hurt also to give you engine Seafoam treatment. Thank you for using fixya and good luck.

...engine light come on. I checked SeaFoam's website and seems that they recommend a second treatment through the intake, but I worry that if it is the cause it could cause more harm than good. ...