...and other times after a short wait. The problem for me was the check engine light would not come on. I could have corrected the problem myself otherwise. The crank sensor was bad. Cost me
Question about Ford Focus
...it over for atleast 10 secs for it to start. Would it be a coil pack or firing problem? Try replacing the crank shaft position sensor. Have you also checked your fuel pressure to check the fuel
...check the fuel pressure,fuel filter,im not sure but ur jeep may have a "cold start injector" sometimes it is the problem Don't know if you have corrected this or not yet but I had a similar problem ...
Question about Ford Focus
check engine light on? If so have the codes scanned for any crank senor problems. The crank sensor and or ignition are problamatic on these engines with high mileage there are 50 causes of stalls. why
...crank start and stall at idle 01 ram 1500 5.2v8 manual transmission engine cranks and firs up will stall out unless I keep the gas pressed and engine rpm above a 1000 new iac, no vacuum leaks, tps ...
check engine light, all I could figure out was random misfires. I replaced the plugs and the same thing kept happening. I decided to change gas stations and went to a BP. They didn't change their fuel
crank it up and make the first stop. Can anybody help me or give any ideas of what could be wrong? The fuel pressure line is getting blocked.Get the fuel pressure checked. Chevy Fuel pressure Reliving
...crank position sensor. Sometimes they throw a fault code, but sometimes they donĀ“t. So first check if there is any fault code set in the PCM with a scanner or using the key dance: ignition switch ...
...crank sensor that was working. if you went braindead,or (bootstrap) you can get a reman pcm at autozone.(lifetime wty) if you don't buy one now, you will later!!! What does that mean? you must read ...
3,753 questions posted
Usually answered in minutes!
3,749 Questions
2,055 Questions
1,226 Questions
897 Questions
840 Questions