2000 Dodge Dakota Quad Cab "abs sensors located" Questions

the front (just behind the bell shaped portion) and the output speed sensor near the rear. In addition to those there are wheel speed sensors for the ABS, located in each wheel area covered by the ABS

...located There is an ABS wheel speed sensor located in the rear differential. If this fails it affects the ABS and may cause your speedometer to read erroneously at speeds under 25-30 mph. There is ...

...Abs light on and e-brake light on. Speedometer doesn't read untill 25 mph The speed sensor that controls the speedometer is located in the top of the rear differential housing, this is your most ...

...ABS light on my dash stayed on. Also my speedometer was not working at all from 0 to 20 miles per hour (mph). It appears to be reading properly from 20 mph and faster. The transmission seems to be ...

...the truck, it was like there was a electrical surge. Any ideas? I have replaced the ABS speed sensor in the rear dif, to no avail! HELP! It's the speed sensor and it is located on the rear

i need to know where the speed sensor is located on the transmission for a 99 dodge dakota 3.9 4 4 the speed sensor for your truck is in the rear differential. it is the same sensor for the rear ABS .

ABS sensors. in turns one wheel goes slower. so... math is does to cure this error.(ABS math) on some cars the VSS is on the rear axle, pinion input shaft or off axle ring gear. THE MAGIC IS ,NOT EVER

...ABS and Brake lights on the instrument panel to come on? Hello There is a speed seneor on the rearend located on the top of the center housing there is 1 wire end and a 10 mm bolt to remove. the ...

abs light and brake light on dash came on brakes work fine what could be wrong? I had the same problem too and I bought a sensor in auto zone and the problem was solved. The sensor is located on top ...

located within frame above rear axle) will trigger cpu to keep abs light on=NOT electrical.#3 is worthless because it does not address brake fluid problem/air in system only(probably how to clear/read