1989 Dodge Ramcharger "89 318 tbi" Questions

Ad

Question about Dodge Ramcharger

1 Answer

...89 ram charger with a 318 tbi i had changed plugs battery checked distributor and rotor and a host of other things because it would crank but not turn on finally took it in to shop ended up being the ...

Ad

Question about Dodge Ramcharger

1 Answer

...89 318 tbi and i finally ran down the solution its the auto shut down relay it goes out and no matter what u do it wont fire over its located on da drvr side fender give it a try drove me nuts for a ...

Ad

Question about Dodge Cars & Trucks

1 Answer

...89 Dodge 318. Replaced stock distributor w/ an HEI. Only two wires on it. Stock one had three How do I connect it to my TBI? So it will receive pulses? Injectors shut off after a few seconds now, ...

...89 Dodge 318 w/ stock TBI. I Installed a new HEI distributor. Could not use stock connector. Now I have no fuel from TBI injectors. Ideas? if spark dies, (ecu thinks so) it must cut fuel to ...

89 dodge d150 318 tbi turn key to on position gas pours out of injection and fills throttle body in seconds I'm wondering is this absolute proof of complete failure of fuel pressure regulator failure?

Question about Dodge Ramcharger

1 Answer

...89 dodge ramcharger with a 318 and TBI. It starts and idles fine and will run wide open fine but when you try and run at a constant speed say 40mph it will start loosing power. during this loss of ...

89 dodge d159 318 will not start unless spay ether or gas into carb, starts immediately then burns off ether an stalls. not getting fuel to TBI sound like you have either a clogged fuel filter or a ...

...89 dodge d150 318 tbi the truck is not running because when key is turned to on position both the injectors absolutely pour gas filling the throttle body in seconds before this accrued it was using a ...

Question about Dodge Ramcharger

1 Answer

...318. When I took it to have it smogged it passed with flying colors but the person told me that the timing was incorrect and it was supposed to be "10" but it was "0". I wondered if this is correct. ...

Not finding what you are looking for?
Cars & Trucks Logo

146 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Dodge Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...