2005 Dodge Ram 1500 "oil sending unit pump" Questions

Ad

Question about Dodge Ram 1500

1 Answer

...oil sending unit??why Check the oil pressure at the sending unit by removing it and using a fitting to an oil pressure gauge to see if it's within specs. The oil pump may be wearing out, causing an ...

Ad

...oil hole that the sending unit is in is clean and clear, then put a gauge on it to make sure its not the gauge, if you still have low oil preasure then you have worn bearings, mostlikely the crank ...

Ad

Question about Dodge Ram 1500

6 Answers

...oil sending unit. Check for oil level ======== Locate and clean the fuel pump relay contacts Clean relay socket CHECK for 12V on socket when key is at ON position REPLACE FUEL PUMP RELAY ========= ...

...oil pump either works or it doesn't, so it's not the problem. Check the wire connection at the pressure sending unit. The wire may be broken at the connector, or you may need to replace the sending ...

...oil pump and sending unit still drops to o on pressure gauge.and theres no nocking or noise if there is no knocking noise then replace the oil sending switch this should fix your problem let me ...

Question about Dodge Ram 1500

1 Answer

oil gauge sending unit, defective oil pump, worn rod and main bearings, plugged oil pickup screen, insufficient oil in engine hole in oil pickup tube, etc. Many issues can cause low oil pressure. Take

the check gauge light came on and it is the oil pressure gauge. I have oil pressure but the gauge is bottomed out. Where is the sending unit for the oil pressure. the oil pump on the timing belt train

Question about Dodge Ram 1500

1 Answer

...pressure is not showing anything at all. sounds stupid put is it possible my sending unit for te oil is bad it was replaced with a new one? u have to replace the oil gauges, and the oil pressure ...

...sending unit. It is an easy and cheap replacement compared to solving low oil pressure issues. If you really had low oil pressure than you would have heard noises like lifters clicking, rod knocks, ...

...sending unit. This hole is deep( 6 to 8 inches) and gets clogged up causing low oil pressure readings. Once clean comes the messy part. Disable the coil/s you don't want it to start. Throw some rags ...

Not finding what you are looking for?
Cars & Trucks Logo

1,093 questions posted

Ask a Question

Usually answered in minutes!

Top Dodge Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...