1991 Buick LeSabre "crankshaft sensor" Questions

...crankshaft position sensor should be located behind the vibration damper/harmonic balancer and it will have to be removed before the crankshaft position sensor can be replaced. (Let me know if you ...

...?€¢ The crankshaft has been replaced. ?€¢ The crankshaft harmonic balancer has been replaced. ?€¢ The crankshaft position sensor has been replaced. Need to have a capable scan tool to do this

...crankshaft sensor on a 3.8L in a 97 buick lesaber Hi, The sensor is located to the right of the crankshaft behind the vibration dampner (harmonic balancer). You will need a balancer puller and a ...

...crankshaft sensor is located behind the crankshaft pulley, you will need to remove the pass/side tire and then the lower cover that covers the pulley area the remove the center crankshaft bolt and ...

...sensor located? crankshaft position sensor is located behind the crank balancer (at the center of the engine behind the big pulley at the bottom) That year has a special removal tool to pull the ...

...crankshaft sensor is located behind the harmonic balancer. There is a special tool you can rent/loan from your local auto parts store in order to remove the harmonic balancer. Once it is off 2 bolt ...

...Crankshaft Position Sensor. This is what lets the computer to know when to fire the ignition for each cylinder. The part is usually not very expensive and can usually be easily replaced. However ...

...CRANKSHAFT sensor and other is a cam sensor. Make sure you know which is which. The crankshaft sensor is at the bottom of the engine, the camshaft is right by the water inlet. It is held in by 1 or 2 ...

...sensor located in an '04 Buick LeSabre? By the crankshaft pulley towards front of car. The crankshaft pulley "balancer" will need to be removed to replace the sensor and you will need and air impact ...

Crankshaft Position Sensor Where is the crankshaft position sensor located on a 1996 Buick LeSabre? the dual crankshaft position sensor is secured in an aluminum mounting bracket and bolted to the ...