2006 Chevrolet Silverado 1500 2WD "taking back brake drum" Questions

Ad

Question about Chevrolet Silverado 1500

1 Answer

...back above the axle. It might have a cap over it or a "punch out." You need to turn the star (slightly visible in attached pic) in I think the up direction several turns to get past the lip in the ...

Ad

Question about Chevrolet Silverado 1500

3 Answers

...brake drum, clearance needed. Looking at the back of the metal backing plate, (Backside of brake drum), there is a oval shaped stamping in the backing plate. If a brake job has been done in the past, ...

Ad

Question about Chevrolet Silverado 1500

1 Answer

...back,if i cant find one with disc can i switch to shoes with any problems? If your current rear end has disc brakes then you need to find one with disc brakes or swap all the disc brake stuff over to ...

Question about Chevrolet Silverado 1500

2 Answers

brake pedal pulsates badly just before coming to a full stop! and makes a loud noise. i have replaced pads and rotors!truck only has 32,000 miles! Since you have replaced pads and rotors I would then ...

Question about Chevrolet Silverado 1500

1 Answer

...back brake drum on a 2002 dodge dakota pick up truck. Remove the rubber plug at the back of the backing plate. Take a brake adjusting tool or screw driver through the hole and turn(pry) the brake ...

Question about Chevrolet Silverado 1500

2 Answers

back brake drums grinding Take tires off then inspect rear brake shoes if okay and not down to the metal service the drums with sand paper and put them back on you might have to replace the drums and ...

Question about Chevrolet Silverado 1500

3 Answers

...back the other way until the drum gets loose enough to take it off. If you are taking the shoes off, take a photo before disassembling so you know how it goes back together. If you can spin the drum ...

Question about Chevrolet Silverado 1500

1 Answer

...taking the nut off.. does it take a puller? Thanks try backing the brake adjuster of it is located inside the drum but there should be a plug that can be removed on the back side of the drum or ...

Question about Chevrolet Silverado 1500

2 Answers

back side of the brake Backing Plate at the bottom,you'll see a rubber plug if still on, if not you'll see a oblong opening,using a brake adjusting tool back off the adjuster thats inside. #5) You can

Question about Toyota Cars & Trucks

1 Answer

...taking a wheel brake drum off.Thank you for any help. drum has two slot for bolts to pits in. the bolt serve as your jack to take your drum's off. and remember the way the cable pits. the same it ...

Not finding what you are looking for?
Cars & Trucks Logo

550 questions posted

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...