2003 Chevrolet Silverado 1500 "low idle" Questions

idle go low enough and will stall starts up again with no problem, think possible throttle position sernsor? Two things,first good clean up throttle body.There is set screw to bring low idle up.Just a

...Low idle when cold out side? http://repairhelpcenter.blogspot.com/2011/12/low-idle-when-cold-out-side.html ----------- GMC Sonoma Stalls and idles low ...

...idle is low when parked, 500+ -- and when done running around it may be as high as 950 rpm, when i turn it oo and turn it on an hour or so later it is fine, still low idle, however it runs great and ...

...low idle it hesitates sometimes when i go to take off like its choked up. At low idle barely moving you stomp the gas and it doesnt accelerate. When passing at wide open throttle fron 2nd to 3rd gear ...

...low idle but it has lots of oil and runs smooth With the low oil pressure if its consistently low without a rise on acceleration then i would look at a pumping issue.If it rises on acceleration the I ...

...low speed / idle speed) needles on the carburetor. This is also called dialing in your engine. There are usually base-line settings for each nitro engine that provide a good starting point for ...

Low idle and stall when warm 1991 nissan 2.4 l d21 4 cy 2 wd After the engine is warm my nissan d21 idles low and stall sometimes. I've replaced the plugs, wires, dis. cap, O2 sensor, and still can't ...

...low idle rough idle, it is the idle speed control air-bypass valve and throttle valve (IAC for short), they get full of gunk over the miles and cause idle issues (stalls, low idle) like yours, Get a ...

leaks. Also sounds like vacuum leak behind steering column when making a sharp turn at low speed. Noticed engine idle @ 500 RPM, Too low?? If your steering is easier above idle the problem is the pump

...idle goes low When I come to a stop or slow down to turn the idle on the truck goes down low and sometimes stalls. THis has happened to me in the past. My fix was to clean the throttle body. The ...