1995 Chevrolet S-10 CA Edition "blower motor works high" Questions

...blower motor wotk on all speeds except high on a 92 s10 my blower motor was working just fine until recently.then the high speed stopped working you need a blower resister most likely. or the speed ...

...blower motor doesn't work in any speed try tapping on the motor with the key on and fan switch on, if the motor starts to work you will need to replace the motor however if the blower works only on ...

blower motor only works on high That would be a blower resistor problem. Very common problem on GM vehicles. The resistor is mounted in the heater case right next to the motor. Follow the wires going ...

...like the blower motor resistor. Located under the hood on top of the heater case. When that goes bad the fan will only work on high speed. GM part # 15094285 cost around $25.00, have a great

blower motor with the handle end of a large screw driver. If the blower starts to work than replace it. If it still won't work check for power on the purple wire (i think its purple) and make sure

...blower motor is only one speed (high) and the switch on the dash has a resistor in it to accomplish the different speeds. Add another switch off most any car or truck to the hot wire you already ...

...have voltage the motor is out, no voltage check the heater control relay. if it blows only on high then its the blower motor resistor located in the duct work under the dash around the glove box ...

...blower motor resistor My blower motor only works on high and from the research I have done they say to replace blower motor resistor. Was wondering if someone could tell me where it's located ...

...blower motor resistor assembly (attached to the blower motor housing) AND the blower motor relay (5 pin relay attached to the back right-side fire wall) and still no change. The only other guesses ...

...blower motor and all the dials for climate control and still when i turn on the a/c or the heater the anti lock light comes on.... when i turn the climate dial to off.... the antilock seems light ...