...ecm/fuel fuse could it b a bad oil sending unit it blows fuse instantly almost i heard it could be a bad oil sending unit? Oil pressure switch is the last item that could cause this. That system ...
...low idle, miss and die. It won't start cause the ECM fuse is blown. Any Ideas? I'm thinking the ECM is bad and grounding out, causing the car to blow the fuse. The old gas wouldn't cause this
...ECM FUSE KEEPS BLOWING OUT. WHAT COULD THE PROBLEM BE?? The key is to find out what is causing the ECM fuse to always blow. With just the key on try and see if any codes are set in the ECM. If not, ...
...cause? it might be your ecm could be internal ,find out if there is anything else on that ecm fuse if its just the ecm ,you will need a ecm,check your wiring from fuse box to the ecm if the wiring is ...
Question about Chevrolet Lumina
...cause of the ECM fuse blowing is a short to ground in one of the ECM sensor circuits. So check all of the engine sensor connections and the sensors. Pay particular attention to wiring underneath the ...
ECM I fuse keeps blowing in my 1996 1 ton gmc sierra 4x4 with a 454 v8 engine whats causing it For the ECM 1 fuse to open you obviously have a short to ground , start with the injector disconnected ...
...ECM is disconnected, cause there is no power to the injectors when you disconnect the ECM. When you turn ignition on check for fuel pressure at fuel rail. Release pressure at nipple on fuel rail. If ...
Question about Pontiac Cars & Trucks
...ecm fuse as soon as it touches the terminal. What could be the cause of it blowing like that Everytime I try to replace the fuse? My ecm was going bad in my 2009 Pontiac g5 so I bought a ecm from a ...
...ecm fuse why does the ecm/batt fuse keep blowing Hi, this could be caused by a short circuit in the ECM or it more commonly found a short circuit in the alternator. Disconnect the battery wire from ...
Question about Chevrolet Lumina
...cause the ECM 1 fuse to keep blowing? ecm1 is injectors not fuel pump ecm-b is fuel pump its more likely to be a faulty relay for the injectors, it would be a similiar design to this this is for the ...
183 questions posted
Usually answered in minutes!
964 Questions
809 Questions
661 Questions
639 Questions
448 Questions