1993 Chevrolet K1500 "lb 40" Questions

Is running out of fuel at high rpms but pressure is 11 lbs.. Is 93 silverado 305 throtle body Fuel pressure is way to low.. it should be in the 40-50 lb range.

...is 470 ft lb pionion brg pre load is 25-45 in lb Dana S110 pinion nut torque is 832 ft lb pinion brg pre load is 20-40 in lb Dana S135 pioion nut is 800 ft lb and pinion brg pre load is 10-40 in ...

40 N.m 30 lb ft Camshaft Cap Bolts 16 N.m 12 lb ft Camshaft Gear Bolt 67.5 N.m 49 lb ft Camshaft Pressure Plate Bolts 10 N.m 89 lb in Connecting Rod Bearing Cap Bolts 25 N.m+30°+15° 18 lb ft

...40-45 lb-ft) Connecting rod bolts - 25-29 Nm (18-21 lb-ft) Camshaft bearing cap bolts - 8-10 Nm (6-7 lb-ft) Intake manifold bolts - 22-25 Nm (16-18 lb-ft) Exhaust manifold bolts - 25-28 Nm (18-21 ...

...40 ft. lb. and the bracket to 70 ft. lb. On yahoo answers a so called mechanic says, caliper bolts to 26 ft. lb. and the bracket to 133 ft. lb. Who the heck is right? Thanks for any correct help. I ...

...lb-ft). 40 Nm (30 lb-ft). 50 Nm (37 lb-ft) Loosen retaining bolts one at a time two to three revolutions and retighten as follows: Long bolts: Tighten to 40-50 Nm (30-37 lb-ft). Rotate an additional ...

...lb-ft). 40 Nm (30 lb-ft). 50 Nm (37 lb-ft) Loosen retaining bolts one at a time two to three revolutions and retighten as follows: Long bolts: Tighten to 40-50 Nm (30-37 lb-ft). Rotate an additional ...

...lb-degF 40 volume percent antifreeze and water - 0.895 BTU/lb-degF 60 volume percent antifreeze and water - 0.805 BTU/lb-degF The heat capacity of ethylene glycol antifreeze plus water is: 20 volume ...

...Nm (30-40 lb-ft). Tighten the power steering bracket bolts to 40-55 Nm (30-40 lb-ft). Tighten the A/C compressor brace nut to 20-25 Nm (15-18 lb-ft). Tighten the idler pulley bolt to 40 Nm (30

40 Lb-Ft)Tighten in sequence to 85-99 Nm (63-73 Lb-Ft)Tighten in two steps20-30 Nm (15-22 Lb-Ft)26-32 Nm (20-23 Lb-Ft)Advance 3/4 to 1 turn after gasket contacts sealing surface or tighten to 13-15 Nm