...any way to stop it from moving? 1/2" Air Impact Gun or hit a wrench You must use air powered impact wrench. stopping and starting several times with impact has always worked for me for almost 40 ...
Question about Cars & Trucks
...air impact for working on cars As with most tools they all have there place, air impacts are better for removing the higher torque fasteners like wheel lugs, suspension components, or engine ...
...impact wrenches. Air tools work better, but if you don't have air, don't go out and rent an electric impact wrench. Waste of time and money. If you can get a box end wrench on it use that as box end ...
...If you do a lot of diy mechanic work I would highly recommend an impact wrench. If you don't have a large enough air compressor you can get a cordless model that will do the job just as
...air impact to finish the job. Often times, the impact will round these off making it virtually impossible to remove without going ahead and destroying them. Try rovercannibal.com for parts if this ...
Question about Jeep Cars & Trucks
...plug. Screw it down till it hits the top of the piston. That will keep the motor from turning. I do reccomend getting an impact wrench. Air is the best, but an elec with a high tourqe will also
...holding rocker shafts are frozen. Tried air impact wrench but only worked on one. Others stripping out Phillips head. Any ideas? thanks use diagonal cutting plier grab the head of screw and work it ...
...air compressor , a pneumatic impact wrench , and an impact socket. It will take the bolt off with minimal effort (you wont even have to hold onto the pulley). It is very difficult. You'll either need ...
...cant get the fan off. yes, use an impact wrench powered by an air compressor. This is how to do it professionally, anyway. You see, the clutch is designed to spin for safety reasons. Good luck to
...the belt and grip it close and hold If out of the car, use an impact wrench attached to an air compressor (3.5 hp or greater should work). Then, you can hold the pulley and the bolts should spin
371 questions posted
Usually answered in minutes!
964 Questions
809 Questions
661 Questions
639 Questions
448 Questions