1990 Chevrolet Camaro "jeep paper plates" Questions

...jeep grand cherokee laredo located V6 4.0 The Crankshaft Position Sensor (CKP) is mounted to the transmission bellhousing at the left/rear side of the engine block...Inatallation: 4.0L EngineNew ...

...spare parts. My spare part dealer says its somewhere in the engine. I have no clue where. I have a Jeep Cherokee 2001 Limited Edition It is on a stamped plate riveted in the engine compartment in a ...

When I let off the gas it dies and the engine light came on. It sounds like your (IAC) idle air control motor is stuck closed by pvc sludge. The fix is remove IAC clean it with tooth brush. Do not ...

paper in the idle at the point where it shuts off the engine. This kept it "open" and the jeep runs at idle with no problems. What is wrong with the idle? I am thinking the piece of paper isn't a long

...Jeep Grand Cherokee wont hold a charge and needs to be jumped. When trying to start it makes a clicking noise and the console instruments jump. Is this the battery??? Or the alternator?? Or something ...

Crankshaft paper I have the same problem with my 99 grand cherokee limited stalling out at lower speeds such as taking off from stop lights and such. I have been searching high and low for a solution.

pump pulley noise coming from the belt area may be the Barings Water pumps are cheep and need to be replaced about every 5 years , sometimes less. Change the pump, it costs 40 bucks. Use Indian Head ...

...jeep book FCA , I have them all.


INSTALLATION - 4.0L (unlike any 4.7!!!!)
The Crankshaft Position (CKP) sensor is mounted
to the transmission bell housing at the left/rear side
of ...

change drum brakes Brake Shoe: Service and Repair REMOVAL 1. Raise vehicle and remove rear wheels. 2. Remove and discard spring nuts securing drums to wheel studs. 3. Remove brake drums. NOTE: If ...

...Jeep Grand. What do I need to replace and how? Thanks for your help. John Replace the crank sensor. The Crankshaft Position (CKP) sensor is mounted to the transmission bellhousing at the left/rear ...